summaryrefslogtreecommitdiffhomepage
path: root/ext-falcon-bms-linear-acc/FlightData.h
diff options
context:
space:
mode:
Diffstat (limited to 'ext-falcon-bms-linear-acc/FlightData.h')
-rw-r--r--ext-falcon-bms-linear-acc/FlightData.h577
1 files changed, 577 insertions, 0 deletions
diff --git a/ext-falcon-bms-linear-acc/FlightData.h b/ext-falcon-bms-linear-acc/FlightData.h
new file mode 100644
index 00000000..10183917
--- /dev/null
+++ b/ext-falcon-bms-linear-acc/FlightData.h
@@ -0,0 +1,577 @@
+#ifndef _FLIGHT_DATA_H
+#define _FLIGHT_DATA_H
+
+
+#define FLIGHTDATA_VERSION 117
+// changelog:
+// 110: initial BMS 4.33 version
+// 111: added SysTest to LightBits3
+// 112: added MCAnnounced to LightBits3
+// 113: added AllLampBits2OnExceptCarapace to LightBits2 and AllLampBits3OnExceptCarapace to LightBits3
+// 114: renamed WOW LightBit to ONGROUND, added "real" (AFM) WOW to LightBits3
+// 115: renamed "real" WOW in MLGWOW, added NLGWOW
+// 116: bitfields are now unsigned instead of signed
+// 117: added ATF_Not_Engaged to LightBits3
+
+// *** "FalconSharedMemoryArea" ***
+class FlightData
+{
+public:
+ // GENERAL NOTE FOR ALL LIGHTBITS:
+ //
+ // The lightbits contain status about whether a lamp is activated or deactivated. A *blinking* lamp
+ // is always activated, even if it is in the "off" phase of the blinking! To check whether an activated
+ // lamp is blinking or just "on", use the BlinkBits in FlightData2. A blinkbit does NOT alternate on/off
+ // either, it will just state *if* a lamp is blinking. This construct might seem strange at 1st sight,
+ // but only like this it can be guaranteed that even low-freq shared mem readers will pick up the info
+ // about blinking lamps correctly. Obviously, it is up to the external program to implement the actual
+ // blinking logic/freq etc.
+ //
+ // Summary:
+ // a) The LightBit says "lamp is active (LightBit 1) or inactive (LightBit 0)".
+ // b) The BlinkBit says "if the lamp is active (see LightBit 1), is it steady (BlinkBit 0)
+ // or is it blinking (BlinkBit 1)"
+ // c) If a lamp has no BlinkBit, it is always assumed to be steady if active (LightBit 1).
+
+ enum LightBits
+ {
+ MasterCaution = 0x1, // Left eyebrow
+
+ // Brow Lights
+ TF = 0x2, // Left eyebrow
+ OXY_BROW = 0x4, // repurposed for eyebrow OXY LOW (was OBS, unused)
+ EQUIP_HOT = 0x8, // Caution light; repurposed for cooling fault (was: not used)
+ ONGROUND = 0x10, // True if on ground: this is not a lamp bit!
+ ENG_FIRE = 0x20, // Right eyebrow; upper half of split face lamp
+ CONFIG = 0x40, // Stores config, caution panel
+ HYD = 0x80, // Right eyebrow; see also OIL (this lamp is not split face)
+ Flcs_ABCD = 0x100, // TEST panel FLCS channel lamps; repurposed, was OIL (see HYD; that lamp is not split face)
+ FLCS = 0x200, // Right eyebrow; was called DUAL which matches block 25, 30/32 and older 40/42
+ CAN = 0x400, // Right eyebrow
+ T_L_CFG = 0x800, // Right eyebrow
+
+ // AOA Indexers
+ AOAAbove = 0x1000,
+ AOAOn = 0x2000,
+ AOABelow = 0x4000,
+
+ // Refuel/NWS
+ RefuelRDY = 0x8000,
+ RefuelAR = 0x10000,
+ RefuelDSC = 0x20000,
+
+ // Caution Lights
+ FltControlSys = 0x40000,
+ LEFlaps = 0x80000,
+ EngineFault = 0x100000,
+ Overheat = 0x200000,
+ FuelLow = 0x400000,
+ Avionics = 0x800000,
+ RadarAlt = 0x1000000,
+ IFF = 0x2000000,
+ ECM = 0x4000000,
+ Hook = 0x8000000,
+ NWSFail = 0x10000000,
+ CabinPress = 0x20000000,
+
+ AutoPilotOn = 0x40000000, // TRUE if is AP on. NB: This is not a lamp bit!
+ TFR_STBY = 0x80000000, // MISC panel; lower half of split face TFR lamp
+
+ // Used with the MAL/IND light code to light up "everything"
+ // please update this if you add/change bits!
+ AllLampBitsOn = 0xBFFFFFEF
+ };
+
+ enum LightBits2
+ {
+ // Threat Warning Prime
+ HandOff = 0x1,
+ Launch = 0x2,
+ PriMode = 0x4,
+ Naval = 0x8,
+ Unk = 0x10,
+ TgtSep = 0x20,
+
+ // EWS
+ Go = 0x40, // On and operating normally
+ NoGo = 0x80, // On but malfunction present
+ Degr = 0x100, // Status message: AUTO DEGR
+ Rdy = 0x200, // Status message: DISPENSE RDY
+ ChaffLo = 0x400, // Bingo chaff quantity reached
+ FlareLo = 0x800, // Bingo flare quantity reached
+
+ // Aux Threat Warning
+ AuxSrch = 0x1000,
+ AuxAct = 0x2000,
+ AuxLow = 0x4000,
+ AuxPwr = 0x8000,
+
+ // ECM
+ EcmPwr = 0x10000,
+ EcmFail = 0x20000,
+
+ // Caution Lights
+ FwdFuelLow = 0x40000,
+ AftFuelLow = 0x80000,
+
+ EPUOn = 0x100000, // EPU panel; run light
+ JFSOn = 0x200000, // Eng Jet Start panel; run light
+
+ // Caution panel
+ SEC = 0x400000,
+ OXY_LOW = 0x800000,
+ PROBEHEAT = 0x1000000,
+ SEAT_ARM = 0x2000000,
+ BUC = 0x4000000,
+ FUEL_OIL_HOT = 0x8000000,
+ ANTI_SKID = 0x10000000,
+
+ TFR_ENGAGED = 0x20000000, // MISC panel; upper half of split face TFR lamp
+ GEARHANDLE = 0x40000000, // Lamp in gear handle lights on fault or gear in motion
+ ENGINE = 0x80000000, // Lower half of right eyebrow ENG FIRE/ENGINE lamp
+
+ // Used with the MAL/IND light code to light up "everything"
+ // please update this if you add/change bits!
+ AllLampBits2On = 0xFFFFF03F,
+ AllLampBits2OnExceptCarapace = AllLampBits2On ^ HandOff ^ Launch ^ PriMode ^ Naval ^ Unk ^ TgtSep ^ AuxSrch ^ AuxAct ^ AuxLow ^ AuxPwr
+ };
+
+ enum LightBits3
+ {
+ // Elec panel
+ FlcsPmg = 0x1,
+ MainGen = 0x2,
+ StbyGen = 0x4,
+ EpuGen = 0x8,
+ EpuPmg = 0x10,
+ ToFlcs = 0x20,
+ FlcsRly = 0x40,
+ BatFail = 0x80,
+
+ // EPU panel
+ Hydrazine = 0x100,
+ Air = 0x200,
+
+ // Caution panel
+ Elec_Fault = 0x400,
+ Lef_Fault = 0x800,
+
+ OnGround = 0x1000, // weight-on-wheels
+ FlcsBitRun = 0x2000, // FLT CONTROL panel RUN light (used to be Multi-engine fire light)
+ FlcsBitFail = 0x4000, // FLT CONTROL panel FAIL light (used to be Lock light Cue; non-F-16)
+ DbuWarn = 0x8000, // Right eyebrow DBU ON cell; was Shoot light cue; non-F16
+ NoseGearDown = 0x10000, // Landing gear panel; on means down and locked
+ LeftGearDown = 0x20000, // Landing gear panel; on means down and locked
+ RightGearDown = 0x40000, // Landing gear panel; on means down and locked
+ ParkBrakeOn = 0x100000, // Parking brake engaged; NOTE: not a lamp bit
+ Power_Off = 0x200000, // Set if there is no electrical power. NB: not a lamp bit
+
+ // Caution panel
+ cadc = 0x400000,
+
+ // Left Aux console
+ SpeedBrake = 0x800000, // True if speed brake is in anything other than stowed position
+
+ // Threat Warning Prime - additional bits
+ SysTest = 0x1000000,
+
+ // Master Caution WILL come up (actual lightBit has 3sec delay like in RL),
+ // usable for cockpit builders with RL equipment which has a delay on its own.
+ // Will be set to false again as soon as the MasterCaution bit is set.
+ MCAnnounced = 0x2000000,
+
+ //MLGWOW is only for AFM , it means WOW switches on MLG are triggered => FLCS switches to WOWPitchRockGain
+ MLGWOW = 0x4000000,
+ NLGWOW = 0x8000000,
+
+ ATF_Not_Engaged = 0x10000000,
+
+ // Free bits in LightBits3
+ //0x20000000,
+ //0x40000000,
+ //0x80000000,
+
+ // Used with the MAL/IND light code to light up "everything"
+ // please update this if you add/change bits!
+ AllLampBits3On = 0x1147EFFF,
+ AllLampBits3OnExceptCarapace = AllLampBits3On ^ SysTest
+ };
+
+ enum HsiBits
+ {
+ ToTrue = 0x01, // HSI_FLAG_TO_TRUE == 1, TO
+ IlsWarning = 0x02, // HSI_FLAG_ILS_WARN
+ CourseWarning = 0x04, // HSI_FLAG_CRS_WARN
+ Init = 0x08, // HSI_FLAG_INIT
+ TotalFlags = 0x10, // HSI_FLAG_TOTAL_FLAGS; never set
+ ADI_OFF = 0x20, // ADI OFF Flag
+ ADI_AUX = 0x40, // ADI AUX Flag
+ ADI_GS = 0x80, // ADI GS FLAG
+ ADI_LOC = 0x100, // ADI LOC FLAG
+ HSI_OFF = 0x200, // HSI OFF Flag
+ BUP_ADI_OFF = 0x400, // Backup ADI Off Flag
+ VVI = 0x800, // VVI OFF Flag
+ AOA = 0x1000, // AOA OFF Flag
+ AVTR = 0x2000, // AVTR Light
+ OuterMarker = 0x4000, // MARKER beacon light for outer marker
+ MiddleMarker = 0x8000, // MARKER beacon light for middle marker
+ FromTrue = 0x10000, // HSI_FLAG_TO_TRUE == 2, FROM
+
+ Flying = 0x80000000, // true if player is attached to an aircraft (i.e. not in UI state). NOTE: Not a lamp bit
+
+ // Used with the MAL/IND light code to light up "everything"
+ // please update this is you add/change bits!
+ AllLampHsiBitsOn = 0xE000
+ };
+
+ // These are outputs from the sim
+ // Note: some two-engine values removed in this version for compatibility
+ // reasons.
+ float x; // Ownship North (Ft)
+ float y; // Ownship East (Ft)
+ float z; // Ownship Down (Ft) --- NOTE: use FlightData2 AAUZ for barometric altitude!
+ float xDot; // Ownship North Rate (ft/sec)
+ float yDot; // Ownship East Rate (ft/sec)
+ float zDot; // Ownship Down Rate (ft/sec)
+ float alpha; // Ownship AOA (Degrees)
+ float beta; // Ownship Beta (Degrees)
+ float gamma; // Ownship Gamma (Radians)
+ float pitch; // Ownship Pitch (Radians)
+ float roll; // Ownship Pitch (Radians)
+ float yaw; // Ownship Pitch (Radians)
+ float mach; // Ownship Mach number
+ float kias; // Ownship Indicated Airspeed (Knots)
+ float vt; // Ownship True Airspeed (Ft/Sec)
+ float gs; // Ownship Normal Gs
+ float windOffset; // Wind delta to FPM (Radians)
+ float nozzlePos; // Ownship engine nozzle percent open (0-100)
+ //float nozzlePos2; // MOVED TO FlightData2! Ownship engine nozzle2 percent open (0-100)
+ float internalFuel; // Ownship internal fuel (Lbs)
+ float externalFuel; // Ownship external fuel (Lbs)
+ float fuelFlow; // Ownship fuel flow (Lbs/Hour)
+ float rpm; // Ownship engine rpm (Percent 0-103)
+ //float rpm2; // MOVED TO FlightData2! Ownship engine rpm2 (Percent 0-103)
+ float ftit; // Ownship Forward Turbine Inlet Temp (Degrees C)
+ //float ftit2; // MOVED TO FlightData2! Ownship Forward Turbine Inlet Temp2 (Degrees C)
+ float gearPos; // Ownship Gear position 0 = up, 1 = down;
+ float speedBrake; // Ownship speed brake position 0 = closed, 1 = 60 Degrees open
+ float epuFuel; // Ownship EPU fuel (Percent 0-100)
+ float oilPressure; // Ownship Oil Pressure (Percent 0-100)
+ //float oilPressure2; // MOVED TO FlightData2! Ownship Oil Pressure2 (Percent 0-100)
+ unsigned int lightBits; // Cockpit Indicator Lights, one bit per bulb. See enum
+
+ // These are inputs. Use them carefully
+ // NB: these do not work when TrackIR device is enabled
+ // NB2: launch falcon with the '-head' command line parameter to activate !
+ float headPitch; // Head pitch offset from design eye (radians)
+ float headRoll; // Head roll offset from design eye (radians)
+ float headYaw; // Head yaw offset from design eye (radians)
+
+ // new lights
+ unsigned int lightBits2; // Cockpit Indicator Lights, one bit per bulb. See enum
+ unsigned int lightBits3; // Cockpit Indicator Lights, one bit per bulb. See enum
+
+ // chaff/flare
+ float ChaffCount; // Number of Chaff left
+ float FlareCount; // Number of Flare left
+
+ // landing gear
+ float NoseGearPos; // Position of the nose landinggear; caution: full down values defined in dat files
+ float LeftGearPos; // Position of the left landinggear; caution: full down values defined in dat files
+ float RightGearPos; // Position of the right landinggear; caution: full down values defined in dat files
+
+ // ADI values
+ float AdiIlsHorPos; // Position of horizontal ILS bar
+ float AdiIlsVerPos; // Position of vertical ILS bar
+
+ // HSI states
+ int courseState; // HSI_STA_CRS_STATE
+ int headingState; // HSI_STA_HDG_STATE
+ int totalStates; // HSI_STA_TOTAL_STATES; never set
+
+ // HSI values
+ float courseDeviation; // HSI_VAL_CRS_DEVIATION
+ float desiredCourse; // HSI_VAL_DESIRED_CRS
+ float distanceToBeacon; // HSI_VAL_DISTANCE_TO_BEACON
+ float bearingToBeacon; // HSI_VAL_BEARING_TO_BEACON
+ float currentHeading; // HSI_VAL_CURRENT_HEADING
+ float desiredHeading; // HSI_VAL_DESIRED_HEADING
+ float deviationLimit; // HSI_VAL_DEV_LIMIT
+ float halfDeviationLimit; // HSI_VAL_HALF_DEV_LIMIT
+ float localizerCourse; // HSI_VAL_LOCALIZER_CRS
+ float airbaseX; // HSI_VAL_AIRBASE_X
+ float airbaseY; // HSI_VAL_AIRBASE_Y
+ float totalValues; // HSI_VAL_TOTAL_VALUES; never set
+
+ float TrimPitch; // Value of trim in pitch axis, -0.5 to +0.5
+ float TrimRoll; // Value of trim in roll axis, -0.5 to +0.5
+ float TrimYaw; // Value of trim in yaw axis, -0.5 to +0.5
+
+ // HSI flags
+ unsigned int hsiBits; // HSI flags
+
+ //DED Lines
+ char DEDLines[5][26]; //25 usable chars
+ char Invert[5][26]; //25 usable chars
+
+ //PFL Lines
+ char PFLLines[5][26]; //25 usable chars
+ char PFLInvert[5][26]; //25 usable chars
+
+ //TacanChannel
+ int UFCTChan, AUXTChan;
+
+ // RWR
+ int RwrObjectCount;
+ int RWRsymbol[40];
+ float bearing[40];
+ unsigned long missileActivity[40];
+ unsigned long missileLaunch[40];
+ unsigned long selected[40];
+ float lethality[40];
+ unsigned long newDetection[40];
+
+ //fuel values
+ float fwd, aft, total;
+
+ void SetLightBit (unsigned int newBit) {lightBits |= newBit;};
+ void ClearLightBit(unsigned int newBit) { lightBits &= ~newBit; };
+ bool IsSet(unsigned int newBit) { return ((lightBits & newBit) ? true : false); };
+
+ void SetLightBit2(unsigned int newBit) { lightBits2 |= newBit; };
+ void ClearLightBit2(unsigned int newBit) { lightBits2 &= ~newBit; };
+ bool IsSet2(unsigned int newBit) { return ((lightBits2 & newBit) ? true : false); };
+
+ void SetLightBit3(unsigned int newBit) { lightBits3 |= newBit; };
+ void ClearLightBit3(unsigned int newBit) { lightBits3 &= ~newBit; };
+ bool IsSet3(unsigned int newBit) { return ((lightBits3 & newBit) ? true : false); };
+
+ void SetHsiBit(unsigned int newBit) { hsiBits |= newBit; };
+ void ClearHsiBit(unsigned int newBit) { hsiBits &= ~newBit; };
+ bool IsSetHsi(unsigned int newBit) { return ((hsiBits & newBit) ? true : false); };
+
+ int VersionNum; // Version of FlightData mem area
+
+ // New values added here for header file compatibility but not implemented
+ // in this version of the code at present.
+ float headX; // Head X offset from design eye (feet)
+ float headY; // Head Y offset from design eye (feet)
+ float headZ; // Head Z offset from design eye (feet)
+
+ int MainPower; // Main Power switch state, 0=down, 1=middle, 2=up
+};
+
+
+// OSB capture for MFD button labeling
+
+#define OSB_STRING_LENGTH 8 // currently strings appear to be max 7 printing chars
+
+typedef struct {
+ char line1[OSB_STRING_LENGTH];
+ char line2[OSB_STRING_LENGTH];
+ bool inverted;
+} OsbLabel;
+
+
+// *** "FalconSharedOsbMemoryArea" ***
+class OSBData
+{
+public:
+ OsbLabel leftMFD[20];
+ OsbLabel rightMFD[20];
+};
+
+
+#define FLIGHTDATA2_VERSION 9
+// changelog:
+// 1: initial BMS 4.33 version
+// 2: added AltCalReading, altBits, BupUhfPreset, powerBits, blinkBits, cmdsMode
+// 3: added VersionNum, hydPressureA/B, cabinAlt, BupUhfFreq, currentTime, vehicleACD
+// 4: added fuelflow2
+// 5: added RwrInfo, lefPos, tefPos
+// 6: added vtolPos
+// 7: bit fields are now unsigned instead of signed
+// 8: increased RwrInfo size to 512
+// 9: added human pilot names and their status in a session
+
+// do NOT change these w/o crosschecking the BMS code
+#define RWRINFO_SIZE 512
+#define CALLSIGN_LEN 12
+#define MAX_CALLSIGNS 32
+
+// *** "FalconSharedMemoryArea2" ***
+class FlightData2
+{
+public:
+
+ // TACAN
+ enum TacanSources
+ {
+ UFC = 0,
+ AUX = 1,
+ NUMBER_OF_SOURCES = 2,
+ };
+ enum TacanBits
+ {
+ band = 0x01, // true in this bit position if band is X
+ mode = 0x02, // true in this bit position if domain is air to air
+ };
+
+ // ALTIMETER
+ enum AltBits
+ {
+ CalType = 0x01, // true if calibration in inches of Mercury (Hg), false if in hectoPascal (hPa)
+ PneuFlag = 0x02, // true if PNEU flag is visible
+ };
+
+ // POWER
+ enum PowerBits
+ {
+ BusPowerBattery = 0x01, // true if at least the battery bus is powered
+ BusPowerEmergency = 0x02, // true if at least the emergency bus is powered
+ BusPowerEssential = 0x04, // true if at least the essential bus is powered
+ BusPowerNonEssential = 0x08, // true if at least the non-essential bus is powered
+ MainGenerator = 0x10, // true if the main generator is online
+ StandbyGenerator = 0x20, // true if the standby generator is online
+ JetFuelStarter = 0x40, // true if JFS is running, can be used for magswitch
+ };
+
+ // BLINKING LIGHTS - only indicating *IF* a lamp is blinking, not implementing the actual on/off/blinking pattern logic!
+ enum BlinkBits
+ {
+ // currently working
+ OuterMarker = 0x01, // defined in HsiBits - slow flashing for outer marker
+ MiddleMarker = 0x02, // defined in HsiBits - fast flashing for middle marker
+ PROBEHEAT = 0x04, // defined in LightBits2 - probeheat system is tested
+ AuxSrch = 0x08, // defined in LightBits2 - search function in NOT activated and a search radar is painting ownship
+ Launch = 0x10, // defined in LightBits2 - missile is fired at ownship
+ PriMode = 0x20, // defined in LightBits2 - priority mode is enabled but more than 5 threat emitters are detected
+ Unk = 0x40, // defined in LightBits2 - unknown is not active but EWS detects unknown radar
+
+ // not working yet, defined for future use
+ Elec_Fault = 0x80, // defined in LightBits3 - non-resetting fault
+ OXY_BROW = 0x100, // defined in LightBits - monitor fault during Obogs
+ EPUOn = 0x200, // defined in LightBits3 - abnormal EPU operation
+ JFSOn_Slow = 0x400, // defined in LightBits3 - slow blinking: non-critical failure
+ JFSOn_Fast = 0x800, // defined in LightBits3 - fast blinking: critical failure
+ };
+
+ // CMDS mode state
+ enum CmdsModes
+ {
+ CmdsOFF = 0,
+ CmdsSTBY = 1,
+ CmdsMAN = 2,
+ CmdsSEMI = 3,
+ CmdsAUTO = 4,
+ CmdsBYP = 5,
+ };
+
+ // HSI/eHSI mode state
+ enum NavModes
+ {
+ ILS_TACAN = 0,
+ TACAN = 1,
+ NAV = 2,
+ ILS_NAV = 3,
+ };
+
+ // human pilot state
+ enum FlyStates
+ {
+ IN_UI = 0, // UI - in the UI
+ LOADING = 1, // UI>3D - loading the sim data
+ WAITING = 2, // UI>3D - waiting for other players
+ FLYING = 3, // 3D - flying
+ DEAD = 4, // 3D>Dead - dead, waiting to respawn
+ UNKNOWN = 5, // ???
+ };
+
+ // VERSION 1
+ float nozzlePos2; // Ownship engine nozzle2 percent open (0-100)
+ float rpm2; // Ownship engine rpm2 (Percent 0-103)
+ float ftit2; // Ownship Forward Turbine Inlet Temp2 (Degrees C)
+ float oilPressure2; // Ownship Oil Pressure2 (Percent 0-100)
+ unsigned char navMode; // current mode selected for HSI/eHSI, see NavModes enum for details
+ float AAUZ; // Ownship barometric altitude given by AAU (depends on calibration)
+ char tacanInfo[NUMBER_OF_SOURCES]; // Tacan band/mode settings for UFC and AUX COMM
+
+ // VERSION 2 / 7
+ int AltCalReading; // barometric altitude calibration (depends on CalType)
+ unsigned int altBits; // various altimeter bits, see AltBits enum for details
+ unsigned int powerBits; // Ownship power bus / generator states, see PowerBits enum for details
+ unsigned int blinkBits; // Cockpit indicator lights blink status, see BlinkBits enum for details
+ // NOTE: these bits indicate only *if* a lamp is blinking, in addition to the
+ // existing on/off bits. It's up to the external program to implement the
+ // *actual* blinking.
+ int cmdsMode; // Ownship CMDS mode state, see CmdsModes enum for details
+ int BupUhfPreset; // BUP UHF channel preset
+
+ // VERSION 3
+ int BupUhfFreq; // BUP UHF channel frequency
+ float cabinAlt; // Ownship cabin altitude
+ float hydPressureA; // Ownship Hydraulic Pressure A
+ float hydPressureB; // Ownship Hydraulic Pressure B
+ int currentTime; // Current time in seconds (max 60 * 60 * 24)
+ short vehicleACD; // Ownship ACD index number, i.e. which aircraft type are we flying.
+ int VersionNum; // Version of FlightData2 mem area
+
+ // VERSION 4
+ float fuelFlow2; // Ownship fuel flow2 (Lbs/Hour)
+
+ // VERSION 5 / 8
+ char RwrInfo[RWRINFO_SIZE]; // New RWR Info
+ float lefPos; // Ownship LEF position
+ float tefPos; // Ownship TEF position
+
+ // VERSION 6
+ float vtolPos; // Ownship VTOL exhaust angle
+
+ // VERSION 9
+ char pilotsOnline; // Number of pilots in an MP session
+ char pilotsCallsign[MAX_CALLSIGNS][CALLSIGN_LEN]; // List of pilots callsign connected to an MP session
+ char pilotsStatus[MAX_CALLSIGNS]; // Status of the MP pilots, see enum FlyStates
+
+ // TACAN
+ // setters for internal use only
+ void SetUfcTacanToAA(bool t) { if (t) { tacanInfo[UFC] |= mode; } else { tacanInfo[UFC] &= ~mode; } }
+ void SetAuxTacanToAA(bool t) { if (t) { tacanInfo[AUX] |= mode; } else { tacanInfo[AUX] &= ~mode; } }
+ void SetUfcTacanToX(bool t) { if (t) { tacanInfo[UFC] |= band; } else { tacanInfo[UFC] &= ~band; } }
+ void SetAuxTacanToX(bool t) { if (t) { tacanInfo[AUX] |= band; } else { tacanInfo[AUX] &= ~band; } }
+
+ // getters for external reader programs
+ bool UfcTacanIsAA(void) {return ((tacanInfo[UFC] & mode) ? true : false); }
+ bool AuxTacanIsAA(void) {return ((tacanInfo[AUX] & mode) ? true : false); }
+ bool UfcTacanIsX(void) {return ((tacanInfo[UFC] & band) ? true : false); }
+ bool AuxTacanIsX(void) {return ((tacanInfo[AUX] & band) ? true : false); }
+
+ // ALTIMETER
+ void SetAltBit(unsigned int newBit) { altBits |= newBit; };
+ void ClearAltBit(unsigned int newBit) { altBits &= ~newBit; };
+ bool IsSetAlt(unsigned int newBit) { return ((altBits & newBit) ? true : false); };
+
+ // POWER
+ void SetPowerBit(unsigned int newBit) { powerBits |= newBit; };
+ void ClearPowerBit(unsigned int newBit) { powerBits &= ~newBit; };
+ bool IsSetPower(unsigned int newBit) { return ((powerBits & newBit) ? true : false); };
+
+ // BLINKING LIGHTS
+ void SetBlinkBit(unsigned int newBit) { blinkBits |= newBit; };
+ void ClearBlinkBit(unsigned int newBit) { blinkBits &= ~newBit; };
+ bool IsSetBlink(unsigned int newBit) { return ((blinkBits & newBit) ? true : false); };
+
+ // CMDS mode state
+ void SetCmdsMode(int newMode) {cmdsMode = newMode;};
+ int GetCmdsMode(void) {return cmdsMode;};
+
+ // HSI/eHSI mode state
+ void SetNavMode(int newMode) {navMode = newMode;};
+ int GetNavMode(void) {return navMode;};
+};
+
+
+extern OSBData cockpitOSBData; // "FalconSharedOsbMemoryArea"
+extern FlightData cockpitFlightData; // "FalconSharedMemoryArea"
+extern FlightData2 cockpitFlightData2; // "FalconSharedMemoryArea2"
+
+#endif